All Products

S355j0wp Building and Garden Decoration Weathering Steel

S355J2WP implements the European standard EN10025-5:2004 standard. One of the S355J0WP weathering steel plates, that is, atmospheric corrosion-resistant steel, is a low-alloy steel series between ordinary steel and stainless steel. S355J0WP is used...

ASTM A36 20mm Thick Hot Rolled Steel Plate

ASTM 36 is the American Standard Carbon Structural Plate, which implements the standard ASTM A36/A36M-03a. This standard applies to riveted, bolted and welded structures for bridges and buildings, as well as general-purpose structural steel quality...

DC01 Cold Rolled Mild Steel Plate

Carbon steel plate, carbon steel plate can be divided into cold-rolled plate and hot-rolled plate according to the plate-making process. Hot-rolled steel sheets are easier to manufacture and lower in cost than cold-rolled steel sheets, but foreign...

ASTM A830-1020 Low Carbon Steel Plate

Steel is a type of abrasion resistant steel that has a surface hardness of 420-470 Hardness Brinell. It is a high-carbon steel alloy composed of several different elements, such as carbon and boron. Its unique composition and treatment allow it to...

4130 Hot Rolled Carbon Steel Plate

4130 Hot Rolled Carbon Steel Plates.4130 Hot Rolled Carbon Steel Plates has high strength and toughness, high hardenability, and the critical hardenable diameter in oil is 15-70mm; 4130 Hot Rolled Carbon Steel Sheet also has good hot strength, with...

DC03 Cold Rolled Mild Steel Plate

DC03 Cold Rolled Mild Steel Plate.The steel plate is a flat steel that is cast with molten steel and pressed after cooling. DC03 Cold Rolled Mild Steel Plates is a product obtained by rolling hot-rolled coils at room temperature below the...

ST37 Hot Rolled Carbon Steel Plate

The steel plate is a flat steel that is cast with molten steel and pressed after cooling. The steel sheet is flat, rectangular and can be directly rolled or cut from wide steel strips. The steel plates is divided according to the thickness, the thin...

ASTM A515 GR.70 Carbon Steel Plate

1. Hot Rolled Steel Plate Hot rolling processing methods include hot rolling, forging, extrusion and other methods. 2. Cold Rolled Steel Plate Cold rolling processing methods include cold rolling, cold drawing and cold drawing, cold bending, cold...

ST52 Hot Rolled Carbon Steel Plate

ST52 Hot Rolled Carbon Steel Plates.ST52 Hot Rolled Carbon Steel Sheet is a low alloy steel. Unalloyed steels are counted as ordinary structural steels, which are mainly characterized by their tensile strength and yield point.For special-purpose...

S275JR Low Carbon Steel Sheet

S275JR Low Carbon Steel Plate is a grade in the European standard "EN 10346-2009 Continuous Hot-Dip Coated Steel Sheet Products", which is a galvanized steel sheet.S275JR Low Carbon Steel Sheet carbon steel sheet means that the tensile strength of...

AiSi 1045 Carbon Steel Plate

Steel is a type of abrasion resistant steel that has a surface hardness of 420-470 Hardness Brinell. It is a high-carbon steel alloy composed of several different elements, such as carbon and boron. Its unique composition and treatment allow it to...

Hot Rolled 420J2 Stainless Steel Wire

Hot Rolled 420J2 Stainless Steel Wire.Stainless steel wire, also known as stainless steel wire, is made of stainless steel as raw materials of various specifications and models, with good corrosion resistance and high cost performance. Hot Rolled...

Hot Rolled Stainless Steel Wire

Stainless steel wire drawing is a metal plastic processing process in which the wire rod or wire blank is pulled out from the die hole of the wire drawing die under the action of the drawing force to produce small section steel wire or non-ferrous...

A7 99.7% and A8 99.8% Aluminum Ingots

Aluminum ingot refers to the aluminum raw material in daily industry. Aluminum ingots are produced by electrolysis from alumina-cryolite. After entering industrial applications, aluminum ingots mainly fall into two categories: cast aluminum alloys...

99.7% 99.9% 99.85% high purity Aluminum Ingot

The raw material in our daily industry is called aluminum ingot. According to the national standard (GB/T 1196-2008), it should be called "aluminum ingot for remelting", but everyone is used to calling it "aluminum ingot". It is produced by...

Aluminum Alloy Ingot 99.7%

Standard aluminum is an aluminum ingot containing 99.7% aluminum Aluminum is a silver-white metal, the third most abundant in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of...

6063 Aluminum Alloy Ingot

6063 Aluminum Alloy Ingot.High Purity 99.99% Ingot to the raw material aluminum in daily industry. It is produced by electrolysis from alumina-cryolite. After aluminum ingots enter into industrial applications, there are two main categories: cast...

High Purity 99.99% Aluminum Ingot

High Purity 99.99% Ingot to the raw material aluminum in daily industry. It is produced by electrolysis from alumina-cryolite. After aluminum ingots enter into industrial applications, there are two main categories: cast aluminum alloys and deformed...

High Quality High Pure Aluminum Ingot

Aluminum ingot refers to the raw material aluminum in daily industry. It is produced by electrolysis from alumina-cryolite. After aluminum ingots enter into industrial applications, there are two main categories: cast aluminum alloys and deformed...

JIS G4401 Hot Rolled Carbon I Beam

I-beam is a kind of steel with an "I"-shaped appearance. It is often used to create work. The flanges of I-beam are of equal thickness, with rolled sections and combined sections composed of three welded plates. Usually I-beams are rolled sections....

S355jr h Iron Steel I Beam

I-beam, also known as steel beam (English name I Beam), is a long strip of steel with an I-shaped section. I-beams are divided into ordinary I-beams, light I-beams, and H-beams. I-beams are widely used in various building structures, bridges,...

SS400 Structural Steel I Beams

SS400 Structural Steel I Beams.I-beams, also known as steel beam (Universal Beam), is a long strip of steel with an I-shaped cross-section. I-beams are divided into ordinary I-beams and light I-beams. It is a section steel with an I-shaped section....

Q235B Structural Galvanized Steel I Beams

Q235B Structural Galvanized Steel I Beams.I steel beams, also known as steel beam (Universal Beam), is a long strip of steel with an I-shaped cross-section. I-beams are divided into ordinary I-beams and light I-beams. It is a section steel with an...

Annealed Binding Wire Cold Drawn Black Iron Wire

Steel wire is one of the four major varieties of pipe, profile, wire and steel plate. The wire is made from hot rolled wire rod and cold drawn. According to the cross-sectional shape of the steel wire, there are mainly round, square, rectangle,...